BRIEF INTRODUCTION AND EXPLANATION ABOUT PRODUCT

This product passed validation of European standard, obtained the SGS certificate, it is a kind of fashion and novel sliding product, it will surely bring some upsurge, this product can be used both for sports and entertainment, and very simple and convenient for installation, furthermore the wheel in both sides will give off the attractive flash while it’s running.

Instruction:

1. Unscrew the screws with hexagonal screw driver.
2. Hold the both ends with both hands and draw it open.
3. Put shoes on it.
4. Hold the both ends with both hands and push, make it tight.
5. Take the shoes out and tighten the screws.
6. Put the foot with shoes on it, buckle and tighten the elastic band, you can adopts the same method for the other foot.

Basic Sliding:

1. First, two feet stand parallelly, as the posture of standing at attention.
2. The left foot steps a little step forward.
3. The right foot steps one step forward and lands with the heel roller.
4. The front (right) and the back (left) feet bend a little bit.
5. The front (right) foot that uses the heel roller as the fulcrum and slip out a step distance. And then the back (left) heel leaves the ground and step out forward with the tiptoe.
6. After the back (left) foot stepping out, land with heel roller and make it at the back of the front (right) foot.
7. Two foot unbend, both feet slide forward alternately in a line direction with the heel roller.

Notice:

1. Only suitable for children above 8 years old.
2. The protective equipment is required when using.
3. Using on the road, ramp, stairs and any place with masses people is prohibited.
4. When first use, ask a coach for instruction or choose a safe place to practice, any damage or injury caused by the user’s own fault, our company is not responsible for any legal liability. 

Copyright 2008 www.flashingwheels.com